• The DNS server specified in the WAN configuration page should be
able to correctly resolve the ADS server name.
• The time zone setting between N7700 and ADS should be identical.
• The system time difference between N7700 and ADS should be less
than five minutes.
• The Administrator Password field is for the password of ADS (Active
Directory Server) not N7700.
The System menu gives you a wealth of settings that you can use to configure
your N7700’s system administration functions. You can set up system
notifications, view system logs, and even upgrade firmware from this menu.
System Notifications
From the System menu, choose the
Notification item, and the Notification
Configuration screen appears. This screen
lets you have the N7700 notify you in case
of any system malfunction. Press Apply to
confirm all settings. See following table for
a detailed description of each item.
NOTE
Consult with your mail server
administrator for email server
information.
Notification Configuration
Item Description
Beep Notification Enable or disable the system beeper that beeps when a problem
occurs.
Email Notification Enable or disable email notifications of system problems.
SMTP Server Specifies the hostname/IP address of the SMTP server.
Port Specifies the port to send outgoing notification emails.
Auth Type Select the SMTP Server account authentication type.
SMTP Account ID Set the SMTP Server Email account ID.
Account Password Enter a new password.
Confirm Account
Password
Confirm a new password.
Receiver’s E-mail
Address
Add one or more recipient’s email addresses to receive email
notifications.
Test E-Mail Click to send out a test e-mail to make sure the settings are
correct.
To Next Page
Loading...
Need help?
General
