DHCP Configuration
A DHCP server can be configured to assign IP addresses to devices connected to
t gure these ports, choose LAN from the Network menu.
he LAN port. To confi
DHCP Configuration
Item Description
DHCP Server sign IP Enable or disable the DHCP server to automatically as
address to PCs connected to the LAN interface.
Start IP Specifies the starting IP address of the DHCP range.
End IP Specifies the ending IP address of the DHCP range.
DNS Server Displayed the DNS server IP address.
NOTE
The IP Segment of WAN and LAN should not overla
p.
k
nu
e system.
ou can change any of these items and press
pply to confirm your settings.
The IP address of the LAN interface should not be in the range of the
dress and End IP address.
WARNING
Start IP ad
WLAN Configuration
When a compatible wireless USB dongle is
installed on the N7700, the N7700 will
become an access point, and the Networ
dropdown menu will contain a WLAN me
item. From the Network menu, choose
WLAN, and the WLAN Configuration
screen appears. This screen displays the
wireless network parameters of th
47
Y
A
WLAN Configuration
Ite
NOTE
• Currently supported USB
wireless dongles are: 3Com
3CRUSB10075, Zyxel G220USB,
PCI GW-US54mini.
• USB dongles have to be
connected before N7700 is
powered up.
m Description
MAC Address Displays the MAC Address of the USB wireless dongle.
IP Specifies the IP address of the network connection.
Netmask
erally: 255.255.255.0 Specifies the network mask, which is gen
ESSID The ESSID (Extended Service Set Identification) is the
identifying name of a wireless network.
ESSID Broadcast
casting the ESSID.
f it sends a matching ESSID.
Specifies whether the ESSID will be broadcasted by the N7700.
This will prevent the Access Point from broad
The N7700 will still respond to a wireless device that wants to
communicate i
Channel The channel that the N7700 uses to communicate with client
devices.
Auth Mode N7700. Authentication mode used by the
Shared: Shared key authentication
Open: Open key authentication