time for each day of the week that you would like to designate a schedule by
using the various dropdowns.
Finally, click Apply to save your changes.
Example - Monday: On: 8:00; Off: 16:00
System will turn on at 8:00 AM on Monday, and off at 16:00 on Monday. System
will turn on for the rest of the week.
If you choose an on time, but do not assign an off time, the system will turn on
and remain on until a scheduled off time is reached, or if the unit is shutdown
manually.
Example - Monday: On: 8:00
System will turn on at 8:00 AM on Monday, and will not shut down unless
powered down manually.
You may also choose two on times or two off times on a particular day, and the
system will act accordingly.
Example - Monday: Off: 8:00; Off: 16:00
System will turn off at 8:00 AM on Monday. System will turn off at 16:00 PM on
Monday, if it was on. If the system was already off at 16:00 PM on Monday,
system will stay off.
Storage Management
The Storage Menu displays the status of storage devices installed in the N7700,
and includes storage configuration options such as RAID and disk settings, folder
configuration, and Nsync settings.
Disks Information
From the Storage menu,
choose the Disks item
and the Disks
Information screen
appears. From here, you
can see various items
about installed SATA hard
disks. Blank lines indicate
that a SATA hard disk is
not currently installed in
that particular disk slot.
Disks Information
Item Description
Disk No. Indicates disk location.
Capacity Shows the SATA hard disk capacity.
Model Displays the SATA hard disk model name.
Firmware Shows the SATA hard disk firmware version.
Status Indicates the status of the disk. Can read OK, Warning, or
27
To Next Page
Loading...
Need help?
General
