Time and Date Settings
From the System menu, choose the Time
item and the Time screen appears. Set the
desired Date, Time, and Time Zone. You
can also elect to synchronize the system
time on the N7700 with an NTP (Network
Time Protocol) Server. You can change
any of these items and press Apply to
confirm your settings.
See the following table for a detailed
description of each item:
Time
Item Description
Date Sets the system date.
Time Sets the system time.
Time Zone Sets the system time zone.
NTP Server Select Yes to allow the N7700 to synchronize with the NTP
server shown below.
Select Manually to allow the N7700 to synchronize with an NTP
server of your choice.
Select No to not have the N7700 to synchronize with an NTP
server.
If an NTP server is selected, please make sure your N7700’s network
has been setup to access the NTP server.
WARNING
System Configuration Backup and Restore
From the System menu, choose the Config
Mgmt item and the System Configuration
Download/Upload screen appears. From
here, you can download or upload stored
system configurations. See the following
table for a detailed description of each item.
System Configuration Download/Upload
Item Description
Download Save and export the current system configuration.
Upload Import a saved configuration file to overwrite current system
configuration.
56
To Next Page
Loading...
Need help?
General
