EasyManuals Logo

Thecus N0503 User Manual

Thecus N0503
153 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
95
The Public setting will be set same as what the setting for the system share folder
associated with the ACL permission setup. If Public is set to Yes, all users will be
able to access it, and ACL button will be grayed out. If Public is set to No, the ACL
button will be available on the Stack Target List window.
Click Apply to save your changes.
B. Activate a Stack Target
After your settings have been applied, the system will bring you back to Stack
Target List window as shown below. There is one stack target device has been
attached into this stack master.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Thecus N0503 and is the answer not in the manual?

Thecus N0503 Specifications

General IconGeneral
RAID levels0, 10, 1, JBOD, 5, 6
Storage drive size3.5 \
Storage drive capacity500 GB
Storage drive interfaceSerial ATA
Storage drives installedYes
Installed storage drive type-
Total installed storage capacity1.5 TB
Maximum supported storage capacity6 TB
Number of storage drives installed3
Number of storage drives supported5
Internal memory1 GB
Internal memory typeDDR2
Processor familyIntel Atom®
Networking featuresGigabit Ethernet
Compatible operating systemsWindows 7/2000/XP/2003/Vista Mac OSX
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Power supply unit (PSU) capacity96 W
Ethernet LAN data rates10, 100, 1000 Mbit/s
Product colorStainless steel
TypeNAS
Device classHome & Home Office

Related product manuals