EasyManuals Logo

Thecus N0503 User Manual

Thecus N0503
153 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #96 background imageLoading...
Page #96 background image
96
With this newly attached stack target device, you will see the information displayed
and also several options you can choose.
In general, if attached stack target device has been used by another
N5200PRO/1U4500/N5500/N8800/N8800/N8800 as stack target volume, then the
Format item will be display and system will recognize it straight away and display
its capacity. Otherwise, the Format item will be available and the Capacity and
Status items will show asN/A” and Unknown file system” respectively.
Next, click Format to proceed with formatting.
After the format is complete, the stack target volume will be created successfully.
You will see the volume’s capacity and status in the Stack Target List screen.
C. Edit a Stack Target
To make any changes to stack targets, click Edit for the corresponding stack target,
and system will bring up the following dialogue:
After your changes have been made, click Apply to confirm any modifications. Once
changes are applied, the associated information will be updated on the Stack
Target List window.
D. Stack Target ACL
If the stack target Public setting set to Yes, then the ACL button will be grayed out.
However, if Public setting is set to No, then the ACL button will be available for you
to setup user access permissions for the stack target.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Thecus N0503 and is the answer not in the manual?

Thecus N0503 Specifications

General IconGeneral
RAID levels0, 10, 1, JBOD, 5, 6
Storage drive size3.5 \
Storage drive capacity500 GB
Storage drive interfaceSerial ATA
Storage drives installedYes
Installed storage drive type-
Total installed storage capacity1.5 TB
Maximum supported storage capacity6 TB
Number of storage drives installed3
Number of storage drives supported5
Internal memory1 GB
Internal memory typeDDR2
Processor familyIntel Atom®
Networking featuresGigabit Ethernet
Compatible operating systemsWindows 7/2000/XP/2003/Vista Mac OSX
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Power supply unit (PSU) capacity96 W
Ethernet LAN data rates10, 100, 1000 Mbit/s
Product colorStainless steel
TypeNAS
Device classHome & Home Office

Related product manuals