Thecus N7700 User Manual

NOTE
Migrating a RAID volume could take several hours to complete
With RAID level migration function, it has two different type “On line” and “Off line”
alone with limitation as listed below.
1. During RAID level migration, it is not allowed reboot or shutdown system.
2. Off line RAID level migration, all services will stop and data is inaccessible.
3. To have ZFS file system created doing on line RAID level migration from R1
to R5 or R1 to R6, the all services will restart and volumes “user data”
and “iSCSI” are read only during operation.
4. To have ext3 and XFS file system created doing on line RAID level
migration from R1 to R5 or R1 to R6, the all services will restart and
volumes “iSCSI” is read only but “user data” is capable read / write during
operation.
5. The other combination to make as “On line” can have read / write work as
normal.
58

Thecus N7700 Specifications

General

RAID levels	0, 1, 5, 6, 10, JBOD
Storage drive size	3.5 \
Storage drive capacity	- GB
Storage drive interface	Serial ATA
Total installed storage capacity	14 TB
Number of storage drives installed	0
Number of storage drives supported	7
Flash memory	128 MB
Internal memory	2 GB
Internal memory type	DDR2
Processor frequency	1.86 GHz
iSCSI support	Yes
Supported network protocols	SMB/CIFS, HTTP/HTTPS, FTP, NFS v3, AFP
Compliance industry standards	802.3ad
USB 2.0 ports quantity	4
Ethernet LAN (RJ-45) ports	2
Dimensions (WxDxH)	210 x 270 x 320 mm
Management platform	Linux
Compatible operating systems	Windows 7/2000/XP/2003/Vista UNIX/Linux Mac OS 9 / X
Power supply unit (PSU) capacity	300 W
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	0 - 80 %

Weight and Dimensions

Weight	8600 g