Thecus N8800 User Manual

27
3. Press the power button on the Front Panel to boot up the N7700.
To connect the N8800 series products to your network, follow the steps below:
1. Connect an Ethernet cable from your network to the WAN/LAN1 port on the
back panel of the N8800.
2. Connect the provided power cord into the universal power socket on the back
panel. Plug the other end of the cord into a surge protector socket. Press the
power supply switch to turn on the power supply.

Thecus N8800 Specifications

General

Brand	Thecus
Model	N8800
Category	Network Storage Server
Language	English