EasyManua.ls Logo

Thermador PLPKIT - Conversion Instructions; Before You Begin; Possible Tools Needed for All Orifice Conversions

Thermador PLPKIT
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 2
California Safe Drinking Water and Toxic
Enforcement Act (Proposition 65) Notice:
WARNING:
This product contains or, through ordinary use
for its intended purpose, facilitates emission of a
chemical or chemicals known to the State of
California to cause cancer and/or birth defects
or other reproductive harm. To minimize
exposure to these chemicals:
1. Perform the LP conversion according to the
instructions in this manual.
2. The conversion and adjustment to the burners should
be done by a certified installer or agency to ensure
proper combustion.
3. Always operate the unit according to the instructions
provided with your Range or Cooktop.
4. Ensure proper ventilation with an open window or use
a ventilation fan or hood when cooking with Gas.
Conversion Instructions
Before You Begin
CAUTION:
Before proceeding with the conversion, shut off
the gas supply to the appliance prior to
disconnecting the electrical power.
Possible Tools Needed for All Orifice
Conversions
Scissors
7mm nut driver
1/2" deep-well socket and drive
1/4" nut driver or wrench
Large, slotted screwdriver, .40" X .050" blade
Extra large, slotted screwdriver, .60" X .060" blade
7/8" wrench or socket and drive
Precision, slotted screwdriver, 1/8" X .020" blade
Phillips #2 screwdriver
Soap and water mixture or leak-check solution
CAUTION:
When connecting the unit to propane gas, make
certain the propane gas tank is equipped with its
own high pressure regulator. The maximum gas
pressure to this appliance is not to exceed 14.0
inches water column from the propane gas tank
regulator.
Table 1: Conversion Kit Contents
Description
Service
Number
Quantity
PLPKIT Instructions 552805 1
Foam Tape, 1” piece 418145 1
Propane Conversion
Label
418146 1
Plastic Bag 418148 1
Star Burner Jet
Orifice
424851 6
Grill Hood Orifice
(open grate style)
418151 1
Grill Hood Orifice
(solid plate style)
414916 1
Griddle Hood Orifice 418150 1
Wok Hood Orifice 414918 1
This Propane Conversion Kit contains the quantities of
parts indicated above; however, some parts will not be
used depending upon the type and model of appliance
being converted to LP Gas. Refer to Table 2 for a listing
of appropriate combination of orifices to be used for
each particular model.
Table 1: Conversion Kit Contents
Description
Service
Number
Quantity

Table of Contents

Related product manuals