Operating Instructions
33
Post Load Procedure
1. Be sure all the doors are closed and locked.
2. Adjust the thermostat(s) to the desired
temperature setpoint(s).
3. Start the unit.
4. Half an hour after loading, defrost the unit by
momentarily pressing the Manual Defrost
switch. If the coil temperature has dropped
below 36 F (2.2 C), the unit will defrost. The
defrost cycle should stop automatically.
Weekly Post Trip Checks
1. Wash the unit.
2. Check for leaks.
3. Check for loose or missing hardware.
4. Check for physical damage to unit.
To Next Page
Loading...
Need help?
General
