Note
Electrical
requirements
Utility
Requirements
If possible, the power connections for the spectrometer and
accessories should be easily accessible for service purposes. The line
for dry air or nitrogen, which is used to purge the system, should also
be accessible
if
service is required.
You should have direct control over the system utilities.
It is important to have all system utilities installed before the
spectrometer arrives. Utility installations must comply with local
building and safety codes ....
Power supplied to the system should be from dedicated,
uninterrupted sources. Power must be free
of
voltage dropouts,
transient spikes, frequency shifts and other line disturbances that
impair reliable performance. Each wall outlet you use must be
equipped with a 3-wire line: live, neutral and ground.
If
you suspect
power quality problems at your site, or
if
your system will be
installed
in
a heavy industrial environment, we recommend a power
quality audit before installation. Contact Thermo Nicolet or your
local electrical authority for more information.
A Danger To assure a good ground connection and avoid shock hazard, do not
use an outlet that is connected to a conduit ground. The ground must
be a non-current carrying wire connected to earth ground at the main
distribution box ....
Note Many
of
the larger accessories offered with some Avatar models,
such as liquid analysis systems and microscopes, require their own
power connections ....
Your spectrometer was specially designed to meet the international
standard: IEC 801-4; electrical fast transient burst immunity
requirements for industrial process, measurement and control
equipment.
Preparing Your Site 15
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General