Introduction
Thermo Nicolet's Avatar™ spectrometers are designed to be
extremely durable and reliable. They will work under adverse
conditions for extended periods; however, to best ensure accurate
results on a repeatable basis, you should maintain a stable working
environment.
Before installation, please read this manual and consider its points
for your system work space. Four major areas are covered in this
manual:
Location - Consult the dimensional drawings
of
the spectrometer
and accessories when planning the location
of
your system. Leave
extra space around the system for clearance and service access.
Environmental considerations - A void excessive static
electricity, temperatures, vibration, intense magnetic fields, and
humidity.
Utility requirements - Before the system arrives, it is important to
install any necessary utilities in the planned work space. You will
need electrical power. You may also need a telephone line, a source
of
dry air or nitrogen and a supply
of
liquid nitrogen.
Accessories -
If
you ordered any accessory modules, consult the
appropriate dimensional drawings to help plan the location
of
your
system. Other preinstallation concerns are included.
If
you suspect that you cannot meet these optimal conditions, or have
other concerns, contact Thermo Nicolet Customer Support for
assistance.
In
the U.S.A., call 1-800-642-6538 or 1-608-276-6373.
Outside the U.S.A., contact your local Thermo Nicolet office.
Telephone numbers for all Thermo Nicolet service offices are
provided on the card that came in this kit.
Preparing Your Site 1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...