MaxQ 2000 Shaker 1-1Thermo Scientific
Section 1 Safety Information
Your Thermo Scientific MaxQ 2000 Shaker has been designed with
function, reliability, and safety in mind. It is your responsibility to install
it in conformance with local electrical codes. For safe operation, pay
attention to the alert signals (Warnings, Cautions, Notes) throughout the
manual.
This manual contains important operating and safety information. The
user must carefully read and understand the contents of this manual prior
to the use of this equipment.
Warnings
To avoid electrical shock, always:
1. Use a properly grounded electrical outlet of correct voltage and current
handling capacity.
2. Disconnect from the power supply prior to maintenance and servicing.
To avoid personal injury:
1. Do not use in the presence of flammable or combustible materials —
fire or explosion may result. This device contains components which
may ignite such materials. Not rated for use in hazardous atmospheres.
2. Use appropriate hand and eye protection when handling hazardous
chemicals.
3. Refer servicing to qualified personnel.
4. Do not modify construction and/or assembly of equipment.
5. Do not remove tags, labels, decals, or other information from the unit.
6. Stand clear of equipment when it is operating.
7. If shaking action will result in the evolution of gases or fumes, perform
the operation in a well-ventilated laboratory hood.
To Next Page
Loading...
