Operating instructions BW3-CTMC + BW3-RF
© 2011 by Thermoplan, subject to change
4.12 Display messages
4 Operation, maintenance and cleaning
Error No. + Picture Text Cause Clearing
TX0113
Piston error Piston cannot move 1. Try dispensing again
2. Rinse the machine
3. Call service
TX0114
Bean hopper empty
(right-hand side)
The right bean hopper is
empty
Rellcoffeebeansonthe
right bean hopper
TX0115 Flow error Nowaterow 1. Open water connection
2. Empty grounds drawer
3. Rinse the machine
4. Call service
TX0116
Overtime error Machine cannot dispense
properly, too little water
1. Try to dispense again
2. Call service
TX0117
Changewaterlter The programmed amount
ofwaterhasown
throughthewaterlter
Changewaterlter.
TX0118
Interface error Interface is active:
- Wrong interface chosen
- No interface connected
Check interface settings
or turn them to „off“
TX0119
Powder error Grinders blocked 1. Empty grounds drawer
+ vacuum grinders (p. 20)
2. Rinse machine
3. Call service
TX0125
Waterowerror Nowateroworow-
meter defective
1. Open water connection
2. Empty grounds drawer
3. Rinse the machine
4. Call service