Thermoplan Black&White3 CT - Copying Settings from CompactFlash Card

REV-4
3.14
© 2009 by Thermoplan AG, Subject to change
SECTION 3
Technical Manual
3. Copy settings from CompactFlash
®
-card to machine
To copy the previously saved data from a CompactFlash
®
-card back to the machine do
as follows:
1. Tap on „Ready“ on the upper left display section.
2. The „Enter PIN“ window appears. Enter Code 4444 and conrm with .
3. The following screen appears:
Copy settings from CompactFlash
®
-card to machine
23
1
56
4
89
7
Enter PIN
****