Thermoplan Black&White3 CT - Resetting Settings to Default Values

REV-4
3.17
SECTION 3
© 2009 by Thermoplan AG, Subject to change
Technical Manual
4. Reset settings to default values
Only reset your machine if theres no other option, as it will delete all customized settings!
Before performing the reset, save your settings on a CompactFlash
®
-card (s. page 11)!
To reset the settings do as follows:
1. Tap on „Ready“ on the upper left display section.
2. The „Enter PIN“ window appears. Enter Code 1111 and conrm with .
3. The following screen appears:
Reset settings to default values
23
1
56
4
89
7
Enter PIN
****