REV-4
3.5
SECTION 3
© 2009 by Thermoplan AG, Subject to change
Technical Manual
Service Levels
By entering different Service Codes you can enter different Service Levels:
Service Level 1: Code 1111
Enter the parameter menus to change settings on products and machine conguration for one access.
Service Level 2: Code 1112 (gets deactivated!!!)
Enter the parameter menus to change settings on products and machine conguration for several accesses.
Access is granted as soon as you push upper left corner (no code needed until machine is turned off and on again).
Service Level 4: Code 4444
Enter the FOX Touchscreen settings. In this menu you can change time and date or save your machine settings to a
CompactFlash
®
-card or vice versa.
To access the different Service Levels do as follows:
To exit the different Service Levels do as follows:
1. Tap on „Ready“ on the upper left display section.
2. The „Enter PIN“ window appears. Enter the desired PIN and conrm with .
Service Level 1 / 2:
As soon as you touch the upper left corner you will exit the Service Level.
Service Level 4:
By pressing the
-button you can step back to the previous screen. Step back until Service Level 1 (parameter menu)
appears, then touch the upper left corner to exit the Service Level.
General handling
To Next Page
Loading...
Need help?
General
