1. Large LCD display
2. Remote low Battery Icon
3. Outdoor temperature
4. Base Station Low Battery Icon
5. Indoor temperature
6. Outdoor humidity
7. Indoor humidity
8. Backlight Touch Button
9. Wail Mount
10. Magnet
11. Stand
12. Battery compartment
13. CHANNEL SYNC
14 .
°
F/
°
C ALL-TIME/24
15. MAX/MIN CLEAR
1. LCD display: Displays the current outdoor humidity/ temperature and indoor humidity/temperature.
2. Battery Compartment: Holds 2 AAA batteries to power the unit.
3. Tabletop, wall-mountable and magnet-mountable design.
4. Indoor Temperature range: -4 °F-158°F(-20°C-70°C).
5. Humidity range: 10% — 99%.
6. Temperature display unit: °C and °F selectable.
7. Temperature Resolution: 0.1 °C/°F.
8. Humidity Resolution:1%.
9. Low battery indication.
Buttons
: Touch once to turn on/off the backlight. If the button is not pressed in 15 seconds, the backlight will
automatically turn off.
MAX/MIN/CLEAR: Press once to display the maximum or minimum temperature and humidity; Press and hold to
clear the history data.
°F/°C/All-time/24: Press to select the temperature display in °C or °F; After pressing the MAX/MIN button, and the
display shows the maximum or minimum temperature and humidity. Touch this button once to set the maximum and
minimum data recording time interval between ALL TIME or 24 hours.
Note: Both ALL TIME and 24 hours represent the last time after you manually cleared the history data or installed a
new battery.
CHANNEL/SYNC: Press to switch between the temperature readings from up to 3 outdoor remote sensors; Press
and hold this button to enter the synchronization mode.
Temperature & Humidity Trend
1. indicates the temperature & humidity are in an upward trend.
2. → indicates the temperature & humidity is in a no change trend.
3. indicates the temperature & humidity is in a downward trend.
Outdoor Remote Sensor (Transmitter) Features
To Next Page
Loading...
