To Next PageTo Next Page
Need help?Do you have a question about the ThermoPro TP-60S and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Refresh Rate | 10 seconds |
| Battery | AAA |
| Auto Shut-off | Yes |
| Backlight | Yes |
| Magnet | Yes |
| Stand | Yes |
| Waterproof | No |
| Humidity Range | 10% to 99% |
| Temperature Accuracy | ±0.9°F (±0.5°C) |
| Wireless Range | 200ft (60m) |
| Power Source | 2 x AAA batteries |
| Features | Max/Min records |
| Resolution | 0.1°F / 0.1°C |
| Cable Length | 6.5 feet (2 meters) |
| Battery Life | Up to 12 months |
| Humidity Accuracy | ±2% (40% to 70%); ±3% (1% to 39% and 71% to 99%) |
Covers battery dangers, high temperatures, short circuits, and fire risks associated with the device.
Provides guidance on not disassembling the device, contacting the dealer for defects, and proper battery usage.
Offers advice on connection issues, interference, temperature effects on the transmitter, and base station placement.
Lists general safety precautions, including avoiding force, water, fire, and keeping the unit away from children.
Describes the functionality of the CHANNEL/SYNC, MAX/MIN/CLEAR, and °F/°C/ALL-TIME/24 buttons.
Describes the functionality of the CHANNEL Selector, RESET, and TX buttons on the remote sensor.
Provides step-by-step instructions for opening the compartment, selecting channels, and inserting batteries.
Details how to open the battery compartment on the base station and insert batteries.
Outlines the steps for pairing remote sensors, including RF signal icon behavior and sync button use.
Recommends placing the base station in a well-ventilated area away from direct sunlight and heat sources.
Advises placing the remote sensor on a flat surface within transmission range and with minimal obstructions.
Provides telephone number, email address, and operating hours for customer support.
