ThermoPro TP-63B - Synchronize Remote Sensors with The Base Station

1. LED
2. Reset
3. Wall Mount
4. Charging Socket
5. ON/OFF
6. Channel Selector
7. Humidity Sensor
8. Temperature Sensor
1. Built-in rechargeable lithium battery: Type 18650.
2. Rain-proof and wall-mount design.
3. Outdoor Temperature range: -31°F-158°F(-35°C-70°C).
4. Humidity range: 10% – 99%. (ON: Flash 1 time, of Flash 3 times)
To access the CHANNEL SELECTOR and RESET buttons, you need to unscrew the cover as per Fig.
CHANNEL Selector (1,2,3): Slide to set Channel 1,2 or 3.
RESET: Press once to reset the remote sensor.
: Press and hold for 2 seconds to turn ON/OFF the unit.
( ON: Flash 1 Time, OFF : Flash 3 Times)
Synchronize Remote Sensors with The Base Station
1. Bring the remote sensor near the base station;