Upgrading via APP
14.TECHNICAL INSPECTION
A technical inspection of the device is recommended before use.
Check the external appearance of the device (there should be no cracks in the casing).
Check the condition of the lens and eyepiece (there should be no cracks, greasy spots, dirt or other deposits).
15.MAINTENANCE
Maintenance should be carried out at least twice a year and consist of the following actions.
Wipe the external surfaces of metal and plastic parts free of dust and dirt with a cotton cloth. Silicone grease maybe used
for this.
Check the glass surfaces of the eyepiece and the lens. If necessary, remove dust and sand from the lenses (preferably using
a non-contact method). Cleaning of the external surfaces of the optics should be done with substances designed especially
for this purpose.
16.FIRMWARE UPGRADE
Hunt series thermal clip-on is supported by the “Smart Thermal” APP, which allows you to transmit the images and videos
from the device to the smartphone or tablet via Hotspot in real time.
The electronic version of this User Manual and the latest firmware can be downloaded from the ThermTec website:
www.thermeyetec.com. Firmware upgrade can also be finished via the “Smart Thermal” APP.
Open Smart Thermal APP.
37
To Next Page
Loading...
