Need help?Do you have a question about the ThermTec Hunt650 and is the answer not in the manual?
Warns against pointing the lens at heat sources to prevent damage.
Caution against small children handling the device due to small parts.
Covers temperature limits, storage, charging, and damage handling.
Guides on proper disposal of the device and its battery per regulations.
Defines the device for nature/hunting observation, not for children.
Outlines pre-use checks for visible damage and image clarity.
Advises on long-term use, storage, and avoiding disassembly to maintain performance.
Provides step-by-step instructions for mounting the device onto a day scope.
Details adapter mounting, locking, and alignment with the day scope.
Explains how to turn the device on, off, and wake it from standby mode.
Describes how to perform image correction using the power button.
Details how to put the device into and wake it from standby mode.
Explains how to adjust focus using the lens focus knob.
Explains how to use zeroing to align reticle with infrared image for accurate shooting.
Details adjusting infrared image position to match the target and saving settings.
General| Resolution | 640x480 |
|---|---|
| Lens | 50mm |
| Pixel Pitch | 12μm |
| Display Resolution | 1024x768 |
| Frame Rate | 50Hz |
| Spectral Range | 8-14μm |
| Focus | Manual |
| Detection Range | 3000m |
| Digital Zoom | 4x |
| Battery Life | 6 hours |
| Operating Temperature | -20°C to +50°C |
| NETD | ≤25mk |
| Thermal Sensitivity | <40mK |
To Next Page
