8.ZEROING
When the Hunt is installed on the day scope properly, if the reticle of the day scope is not at the center of the infrared image,
the image zeroing function can be used to shift the infrared image to ensure the position consistency between the day scope
image and the infrared image.
Please finish the correction of the day scope before mounting the Hunt.
Install the Hunt on the day scope referring to the Installation section.
Aiming at the 100m target and shoot.
On the home screen, double click Menu button “M” to enter the main menu interface.
Press the “+ / -” button to move the cursor up or down, and select
the Zero Profile option and choose a zero profile with a short
press of the menu button “M”.
29
14:04P1
P1 P2 P3 P4
Zero Profile/P1
To Next Page
Loading...
