Thevco VLC-3 - Page 10

10
VLC-3 rev.04
VLC-3
STEP BY STEP PROGRAMMING :
Once step 1 to 10 are done, the user must enter the programming mode
to adjust the periods, dusk-to-dawn and peak parameters. The first
example shows the key sequence for programming 2 dusk-to-dawn
programs without periods. The second example illustrates the key
sequence for programming 2 periods with 2 dusk-to-dawn programs.
EXAMPLE 1 : Two dusk-to-dawn programs without periods.
Dusk-to-Dawn Program 1:
start time: 6:30am
stop time: 10:30am
maximum light intensity: 80%
NB. The numbers shown in bold characters flash on the display.
PETSNOITCAYALPSIDsDELGNINAEM
1
otrotcelesnruT
MARGORP
OTPETSHSUP
GORPRTNE
margorPgniretnE
edoM
2nottub-hsupsserP.dd 1
nwaD-ot-ksuD
1margorP
3nottub-hsupsserP ffO
nwaD-ot-ksuD
etatS1margorP
4NOottsujdA nO
txenhtiweunitnoC
margorp
5nottub-hsupsserP 21 00:
tratSmargorP
)nim;sruoh(emiT
6sruohtsujdA 6 00:
7nottub-hsupsserP:6 00
8setunimtsujdA:6 03
9nottub-hsupsserP 21 00:
potSmargorP
)nim;sruoh(emiT
01sruohtsujdA 01 00:
Dusk-to-Dawn Program 2:
start time: 12:45pm
stop time: 3:10pm
maximum light intensity: 75%