31
VLC-3 rev.04
VLC-3
The program returns to DUSK-TO-DAWN PROGRAM NUMBER or PEAK
# depending on the type of program unit deleted. The display shows the
first program unit (i.e. dd.1 or Pe.1).
12. REPARTITIONING THE PERIODS
Periods can be repartitioned without affecting the program units defined
for each period. For example:
The values that cannot be changed are the first days of each period and
the Last Day of the last period (always 365). Once you change the last
day of a period, the first day of the next period is one greater than this
value, etc.
Turn the function selector until the PROGRAM LED turns on. The
message “PUSH STEP TO ENTR PROG” (PUSH STEP TO ENTER
PROGRAM) is displayed.
Press the push-button.
The PROGRAM pilot light turns off and the FIRST DAY OF PERIOD
pilot light turns on. Period 2 is defined to begin where Period 1 ends.
The appropriate PERIOD pilot light flashes to indicate which period is
currently being programmed. Use the adjustment knob to step to the
appropriate period.
251
26
125 126
200 201 365
Day
Day
Original Partitions:
New
Partitions
Period 1
8 dd
12 PE
Period 2
4 dd
3 PE
Period 3
1 dd
20 PE
Period 4
1 dd
1 PE
981
99
125
126
181
365
180
To Next Page
Loading...