9
VLC-3.rev.04
USING AND PROGRAMMING
7. QUICK START-UP
Follow these basic steps for activating the controller. If necessary,
consult the indicated reference for each step to get detailed informa-
tions.
ADJUSTING COMMON PARAMETERS
1. Connect the control according to the wiring diagram enclosed with
this manual.
2. Turn the power ON.
3. Adjust the clock (see sec. 8.2).
4. Adjust the day counter. This counter is used to activate the light
programs (see sec. 8.3).
5. Adjust the minimum light intensity. This is the lowest level of lighting
used when no programs are currently active (see sec. 8.4).
6. Adjust the sunrise duration. This is the duration of the transition from
minimum to maximum light intensity in a light program (see sec. 8.5).
7. Adjust the sunset duration. This is the duration of the transition from
maximum to minimum light intensity in a program (see sec. 8.6).
8. Adjust the percentage used for activating the auxiliary output. (see.
sec 8.7).
9. Adjust the percentage used for deactivating the auxiliary output (see
sec. 8.8).
10. Set the period menu to On or Off depending if you are planing to use
periods or not. The controller uses periods to automatically change
the lighting programs based on the animal age (see sec. 8.8).
To Next Page
Loading...