EasyManua.ls Logo

Thevco VLC-3 - 2 Precautions; 3 Mounting Instructions

Thevco VLC-3
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
VLC-3 rev.04
VLC-3
2. PRECAUTIONS
Although fuses at the input and outputs of the controller
protect its circuits in case of an overload or overvoltage,
we recommend installing an additional protection device
on the controller's supply circuit.
The room temperature where the controller is located
MUST ALWAYS REMAIN BETWEEN 32°F AND 104°F
(0°C TO 40°C).
To avoid exposing the controller to harmful gases or
excessive humidity, it is preferable to install it in a
corridor.
DO NOT SPRAY WATER ON THE CONTROLLER
3. MOUNTING INSTRUCTIONS
Open the latch on the right and lift the cover. Mount the enclosure on
the wall using four screws. Be sure the electrical knockouts are at the
bottom of the enclosure in order to prevent water from entering the
controller. Insert the screws in the mounting holes provided and tighten.
Fasten the black caps provided with the controller onto the mounting
holes.