EasyManua.ls Logo

Thinklabs One - Diaphragm Pressure and Frequency Response

Thinklabs One
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Power - Auto Shut Off Time Programming
You can set the Auto Shutoff time to be from 1-10 minutes. You can also disable
Auto Shutoff. To program Auto Shutoff:
1. Turn on One by pressing any key.
2. Click the Alt Key to indicate the number of minutes you'd like to program for
Auto Shutoff. If you'd like a 1-minute Auto Shutoff time, click once; for 2
minutes, click twice; for ten minutes, click 10 times. DO NOT CLICK MORE THAN
10 TIMES if you want Auto Shutoff to operate.
3. Now Push and Hold the Alt Key until the One shuts off. This will take about 15
seconds. Your One is now programmed.
Constant On Mode - Disabling Auto Shutoff
Perform the same procedure as above, but Click the Alt Key AT LEAST 11 times in
Step 2.
15

Other manuals for Thinklabs One