General Maintenance and Cleaning
● Do not immerse your One electronic stethoscope in any liquid. If One is
inadvertently immersed in liquid, do NOT Power ON the unit. Completely
dry out the inner spaces before trying to use the stethoscope again.
Contact Thinklabs for assistance.
● Do not sterilize One using any sterilization process.
● Wipe your One with alcohol swabs or a soft cloth moistened with alcohol or
water. Do not use abrasive cleaning agents, and do not allow fluids to enter
the device.
● Avoid extreme heat, cold or humidity for either storage or use of this
device. -4F to 110F (-20C to 43C) storage. Room temperature is
recommended for use. Note that closed vehicles reach well above 120F in
summer.
● Avoid excessive force applied to any part of the stethoscope. Damage could
result.
● Avoid dropping the One on hard floors, especially concrete. Damage could
result.
● Fully charge battery if stethoscope is not to be used for a period of months.
● Damage resulting from inappropriate care of the device may compromise
product performance or void the Warranty.
21
To Next Page
Loading...
