1.
Select the desired song as described here:
Ä
‘Selecting a song’ on page 23.
2.
Adjust the desired tempo as described here:
Ä
‘Adjusting the playback speed’ on page 25.
3. Start the playback with [start/stop].
4. Hit the pads synchronously to the indicator LED.
To turn the learning function (display of the pads to be played via indicator LEDs) on
or off, press the buttons [hi-hat control] and [kick] simultaneously.
6.2
Playing, customising and accompanying songs
Your digital drum set offers 50 pre-installed songs in total. When turning the drum module on,
song ‘001’ is shown on the display by default.
Selecting a song
Operation
MPS-200
23