1. Press the [song/volume] button.
ð
The song volume is indicated in ‘Axx’ format in the display, the Song LED on the
right below in the three-digit display turns off.
2. Adjust the volume using the [–] and [+] buttons in a range of 00 to 31.
You can adjust the playback speed using the [tempo/tap –/+] button in a range of 30 to 280
beats per minute. Press the [–] or [+] briefly to increase or decrease the displayed value by one.
Keep the [–] or [+] button pressed to increase or decrease the value quickly.
To reset the playback speed to the default value (display value ‘098’) press the middle
of the [tempo/tap –/+] button.
After two seconds, the display automatically returns to the song or kit number indica‐
tion.
To accompany a song in your own tempo, the playback speed can be pre-counted using the
Tap Timer function.
Adjusting song volume
Adjusting the playback speed
Tap-Timer (pre-count function)
Operation
MPS-200
25
To Next Page
Loading...
