Param‐
eter
Display Meaning Value range
TIME SIG‐
NATURE
SIG XXX Emphasis on beats 0 … 9/2, 0 … 9/4,
0 … 9/8,
0 … 9/16
INTERVAL INT XXX Beats per measure 1/2, 3/8, 1/4, 1/8,
1/12, 1/16
VOLUME VOL XXX Click volume 0 … 5
NAME NUM XXX Name and number of the cor‐
responding Click voice
1 … 6
6.7 Recording functions
This feature allows you to use the drum module for recording. You can record your
own drum track with or without an accompanying song. The recording can be stored
in 5 user songs as a MIDI le directly in the drum module or stored in an MP3 le on a
USB stick.
1. Hold down [SONG/REC] for about 2 seconds.
ð
The indicator LED of the button ashes.
2. Use the arrow buttons ([<] / [>]) or the jog wheel to select the user song (dis‐
play shows ‘81’ … ‘85’ ) in which the recording is to be stored.
3. Press [ST/SP].
ð
The display shows ‘RDY’ . The device is now record-enabled.
1. When the device is record-enabled (the display shows ‘RDY’ ), press [ST/SP] or
hit a pad.
ð
The recording starts after 4 beats. The display shows ‘ING’ .
2. To stop recording, press [ST/SP].
ð
The indicator LED of the button goes out.
3. Press [ST/SP] to play the recorded song.
When the recording capacity is exhausted, the display shows ‘REC FUL’ . The
recording then stops automatically.
Recording preparation
Starting and stopping recording
Operating
MPS-450
19
To Next Page
Loading...
Need help?
General