6.12 Utility menu
In this menu, you can change various settings of the device.
1. Press [UTILITY].
ð
The display shows the Utility menu.
2. Press [PAGE] repeatedly until the desired sub menu is displayed.
3. Use the arrow buttons ([<] / [>]) or the jog wheel to change the parameter
value.
Param‐
eter
Display Meaning Value
range
GM
MODE
GM XXX Denes the processing of pro‐
gramme change commands: ON:
Programme change commands
for MIDI channel 10 are processed
as selection (GM kit). OFF: Pro‐
gramme change commands for
MIDI channel 10 are processed as
selection (local kit).
ON, OFF
AUTO
POWER
POW XXX Denes the behaviour of the auto‐
matic shuto:
n ‘30’ (automatic shuto after
30 minutes)
n ‘60’ (automatic shuto after
60 minutes)
n ‘OFF’ (automatic shutdown
o).
30, 60,
OFF
6.13 Status messages
Status message Meaning
REC FUL The storage capacity for the recording is exhausted.
FAC SEt The factory reset is complete.
EMP The user song list is empty.
OK The device settings and drum kit settings have been saved.
WAT Data is loaded from the ash ROM, please wait.
Adjusting device settings
Operating
e-drum module
26
To Next Page
Loading...
Need help?
General