5.5.2.2 Start recording
1. Hit the desired pad for which you want to record a loop.
2. Press [REC] to open the record menu.
3. Press [SELECT] repeatedly to switch between submenus.
4. Use the rotary control or press [–/+] to change the respectively displayed value.
5.
Press or to select ‘START’ .
6. Press [REC] to start recording.
ð
‘RECORD’
is ashing in the display. The metronome is automatically turned
on. To set the metronome according to your requirements, proceed as
described under
Ä
Chapter 5.9 ‘Metronome’ on page 21.
A maximum of 5000 beats can be recorded per recording. When the max‐
imum is reached, the recording is automatically ended. If you start a new
recording without saving the previous one, the previous recording will be
overwritten. If you switch to another function while recording, the recording
will be discarded.
5.5.2.3 Stopping and saving a recording
1. Press [REC] again to stop recording.
ð
The display shows ‘STOP’ .
2. Press [OK] to save the recording.
ð
The display shows the name of the recording.
5.5.2.4 Playing recording
1.
Press or to select ‘PLAY’ .
2. Use the rotary control or press [–/+] to select a recording.
3. Press [OK] to play the recording.
4. Press [OK] again to stop playback.
Operating
sampling percussion pad
16
To Next Page
Loading...
Need help?
General
