4 Installation
1. Make sure that the device is turned o before you connect it to the power
supply or disconnect it.
2. Turn the volume control to minimum.
3. Connect the included power adapter to the 12V connector of the unit and then
plug the power adapter into a wall outlet.
4. Now you can turn on the device.
If the piano is not in use or when a thunderstorm with danger of lightning
threatens, disconnect the device from its mains power for safety.
NOTICE!
Risk of re due to incorrect polarity
Incorrectly inserted batteries may destroy the device or the batteries.
Ensure that proper polarity is observed when inserting batteries.
NOTICE!
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device.
Take batteries out of the device if it is not going to be used for a longer
period.
Mains connection
Battery operation
Installation
10
SP-320
Digital Piano
To Next Page
Loading...
