thomann SP-320 - Functions; Demo Songs and Sound Effects; Metronome Operation

8 Functions
For an overview of the assignment of functions to the keyboard, see
Ä Chapter 12 ‘Function button allocation’ on page 27.
8.1 Playing demo songs
Press [REVERB] and [CHORUS] simultaneously to enter Demo song play mode. Use the
select buttons to select the desired demo song.
Press [REVERB] and [CHORUS] again to stop playback.
8.2 Reverb and Chorus eects
The sound of the digital piano can be modied by the built-in Reverb and Chorus
eect. Press [REVERB] or [CHORUS].
8.3 Metronome
Press [METRONOME] to turn the Metronome on and o.
Proceed as follows to set the time signature:
1. Keep [METRONOME] and [TEMPO] pressed to enter edit mode.
2. Use the piano key [G#0] to select the desired time signature: 2/2, 1/4, 2/4, 3/4,
4/4, 5/4, 6/4, 3/8, 6/8, 7/8, 9/8 or 12/8. Standard value is set to 4/4.
3. Keep [METRONOME] and [TEMPO] pressed to exit edit mode.
Proceed as follows to adjust the volume:
1. Keep [METRONOME] and [TEMPO] pressed to enter edit mode.
2. Press [F#0] to switch to the volume menu for the main layer.
3. Now you can adjust the volume in 88 note steps from 0 – 127. [C7] corresponds
to value 127 and [A-1] to value 0.
4. Keep [METRONOME] and [TEMPO] pressed to exit edit mode.
Setting the metronome volume
Functions
SP-320
19
Digital Piano