23
EN
WI-FI CONTROL MODULE FOR HEATER PILOT WIRE
D - USING THE PRODUCT
then on "enregistrer" (save).
This example shows how to programme the turning
on of a heating module; you need to follow the
same steps to programme its turning off.
You can also add a duration for an action to
programme it to turn off.
Click on "ajouter une action" (add an action), then
on "patienter" (wait),
set the duration of the action, then "suivant" (next)
Now you only need to programme the nal action
in this time delay sequence. Press on "Ajouter une
action" (Add an action)
To Next Page
Loading...