26
WI-FI CONTROL MODULE FOR HEATER PILOT WIRE
EN
E - TECHNICAL AND LEGAL INFORMATION
1 - TECHNICAL CHARACTERISTICS
• Radio frequency: 2.4GHz WiFi
• Power: maximum transmitting power 100 mW
• Radio range: up to 30m indoors.
Up to 25m if going through walls
• Power supply: 230VAC 50Hz
• Operating temperature: 0°C à 40°C,
indoor use only
• Maximum power: 1150W - 5A
• Connection: wired connection between the
module and the device to be operated
• Cable section up to 2.5mm
2
• Average consumption: < 1 W
• Protection rating: IP20
2 - WARRANTY
This product is guaranteed for parts and labour
for 2 years from the date of purchase. Proof of
purchase must be retained for the duration of the
warranty period.
The warranty does not cover damage caused by
knocks or accidents.
The parts of this product must not be opened or
repaired by any persons not employed by Avidsen.
The warranty will be void if the device is tampered
with.
Avidsen undertakes to keep a stock of spare parts
for this product throughout the contractual warranty
period.
3 - HELP AND SUGGESTIONS
• If, despite the care we have taken in designing
our products and drafting these instructions, you
do encounter difculties when installing your
product or you have any questions, we urge you
to contact one of our specialists who will be glad
to help.
• If you encounter operating problems during
the installation or a few days afterwards,
it is essential that you are in front of your
installation when contacting us, so that one of
our technicians can diagnose the source of the
problem, as it will probably be the result of a
setting that is incorrect or an installation that is
not to specication. If the problem is caused by
the product itself, the technician will inform you
of the returns procedure.
Contact our after sales service team technicians:
0,35 €
/ min
0 892 701 369
Monday to Friday, 9AM to 12PM and 2PM to 6PM
CET.
4 - PRODUCT RETURNS - AFTER SALES
SERVICE
If, despite the care we have taken in designing and
manufacturing your product, it needs to be returned to
our customer service centre, you can check the progress
of the work on our website at the following address:
https://www.avidsen.com/nos-services
5 - DECLARATION OF CONFORMITY
Avidsen declares that the equipment complies
with the essential applicable requirements of RED
Directive 2014/53/EU.
Directive 2014/35/EU: (protection of users’ health
and safety)
EN 60335-1:2012 + A11:2014 + A13: 2017
EN 62311:2008
Directive 2014/30/EU: (protection requirements
relating to electromagnetic compatibility).
EN 301 489-1 V2.1.1
EN 301 489-17 V3.1.1
Directive 2014/53/EU: (efcient use of the radio
spectrum, in order to avoid harmful interference).
EN 300 328 V2.1.1
Tours, 08/01/2020
Alexandre Chaverot, CEO
To Next Page
Loading...