WIRELESS COLOUR VIDEO INTERCOM WITH OP-
TIONAL VIDEO SURVEILLANCE
21
EN
G - ADD-ON PRODUCTS
1 - WIRELESS COLOUR CAMERA 512167
If you have purchased additional cameras (up to 3
in total) to extend the surveillance of the product,
each camera must be paired as was done for the
exterior panel:
This menu allows you to activate or deactivate
channels, pair additional cameras (not included, ref.
512167), and adjust the brightness of the cameras.
Your product has a total of 4 channels and your
exterior panel is assigned to channel 1 by default.
You can then add 3 additional cameras in order to
establish video surveillance.
Once your chosen channel is activated, begin
pairing by pressing the
button.
Note: once this button is shining bright blue, you
have 30 seconds to briefly press the pairing button
found on the power cord.
To Next Page
Loading...
