THOMSON RR640CD - Operating the Clock - Time Setting; Setting the Current Time; Setting Wake to Tone Alarm

EN
6
Operating the Clock
Press SET CLOCK/WAKE repeatedly to
select SET CLOCK, SET WAKE 1, SET
WAKE 2 and LOCK.
Setting Time
1. Press SET CLOCK / WAKE, will
appear on the display.
2. Press << REV or FWD >> to select
current time while the clock icon is
displayed.
Note:Note:
Note:Note:
Note:
Press and hold
<< REV << REV
<< REV << REV
<< REV or
FWDFWD
FWDFWD
FWD
>>>>
>>>>
>> to skip fast.
Setting Wake to Tone
1. Press WAKE 1 to select wake to
Alarm. indicator will light to
show selection.
2. Press SET CLOCK / WAKE until
appears on the display.
3. Press << REV or FWD >> to set the
wake time.
Note:Note:
Note:Note:
Note:
The unit equips with
GRAD-U-GRAD-U-
GRAD-U-GRAD-U-
GRAD-U-
WAKEWAKE
WAKEWAKE
WAKE feature, the alarm tone
volume will increase gradually to its
maximum in about 30 to 45 seconds.
Note:Note:
Note:Note:
Note:
You cannot adjust the alarm tone
with volume.
WAKE 1
1
Note:Note:
Note:Note:
Note:
The display backlight colour will
be in red in WAKE 1 or WAKE 2
setting mode or when WAKE 1 or
WAKE 2 is activated.