EN
9
Operating the Clock
Adjusting Snooze
Duration
The snooze-alarm control allows extra
sleep time after the unit comes on in
alarm mode. Press SNOOZE to turn off
the alarm until the snooze period is
over. You can use the SNOOZE feature
repeatedly for up to about 2 hours,
after which the unit will turn off until
the next alarm conditions are met.
1. Press and hold SNOOZE.
2. Press << REV or FWD >> on the top
of the unit to set the “quiet” period
(default is 9 minutes) from 1 minute to
30 minutes for which the alarm
momentarily goes off.
To silence the alarm
momentarily:
Press SNOOZE and the alarm will sound
again when the snooze period is over
(see “Adjusting snooze duration”
above).
To stop alarm from sounding:
Press OFF and the alarm will be on
again the following day at the same
time.
To cancel alarm completely:
Press CANCEL then WAKE 1 or WAKE
2 and the corresponding alarm(s) won’t
sound again the following day. WAKE
indicators will not be displayed.
• If you press WAKE 1 or WAKE 2
button again, the previous preset time
remains unchanged.
Note:Note:
Note:Note:
Note:
If uninterrupted, the alarms will
stop sounding in 2 hours.
To Next Page
Loading...
