THOMSON RR640CD - Operating the Clock - Radio Wake; Setting Wake to Radio

EN
7
Operating the Clock
Setting Wake to Radio
1. Press WAKE 1 to select wake to
Radio . The related indicator will
light to show selection.
2. Press SET CLOCK / WAKE until
indicator lights on the display.
3. Press << REV or FWD >> to select
the time you want music to start
playing.
4. Setting Wake Station
a. Press RADIO ON/BAND to select
FM/MW and press << REV or FWD >>
to tune to your desired station.
b. Press and hold WAKE UP until the
“AL” indicator lights on the display to
save the selected station as the wake
up station.
5. Press VOLUME - or + to your desired
wake-up volume.
6. Press OFF to turn off the unit.
1
Note:Note:
Note:Note:
Note:
When setting WAKE 2, follow
the same procedure described
above.
Note:Note:
Note:Note:
Note:
• If no WAKE STATION is set,
the wake station will stay at
your last listening station.
• To change to another wake
mode (e.g. from CD to radio),
simply press WAKE 1 or WAKE 2
to scroll through wake options.
WAKE 1
1
1
1
Note:Note:
Note:Note:
Note:
The display backlight colour will
be in red in WAKE 1 or WAKE 2
setting mode or when WAKE 1 or
WAKE 2 is activated.