THOMSON RR640CD - Radio Memory Functions; Storing Radio Frequencies

EN
12
Radio
Radio Frequency Memory
1. Refer to “Listening to Radio” to tune
to the desired station.
2. To set frequency into memory, press
MEMO SET and the MEMO indicator
will flash . Preset station number will
be automatically assigned (the next
available number) and show on the
display.
Press MEMO RECALL to select
another preset location.
3. Press MEMO SET to cofirm your
settings.
If memory is full, you will see “--” on
the display.
Memory Recall
Press MEMO RECALL repeatedly to
recall preset stations when radio is on.
Tip:Tip:
Tip:Tip:
Tip:
Maximum 11 (10 preset locations
and 1 alarm memory location)
preset stations can be stored.
You can also overwrite preset
station numbers by pressing
MEMO SET MEMO SET
MEMO SET MEMO SET
MEMO SET to enter setting
mode. Press
RECALL RECALL
RECALL RECALL
RECALL to
select the number and
SETSET
SETSET
SET
again to confirm selection.
Cancel Memory
Recall the station you want to cancel
and press and hold MEMO SET to
cancel memory setting.