THOMSON SpeedTouch 585(v6) - Back up & Restore

48
E-DOC-CTC-20051017-0147 v1.0
Chapter 4
SpeedTouch™ Web Interface
4.3.5 Back up & Restore
Introduction The Back up & Restore page allows you to:
 Save your current configuration.
 Restore a previously saved configuration.
Accessing the Backup
& Restore page
Proceed as follows:
1 In the SpeedTouch menu, click Configuration.
2 Click Configure.
3 In the Pick a task list, click Save or Restore Configuration.
Saving your current
configuration
Proceed as follows:
1 Click Back up Configuration Now.
2 Click Save.
3 Choose a location to save your backup file and click Save.
Restoring a previously
saved configuration
Proceed as follows:
1 Click Browse.
2 Select the configuration file you want to restore and click Open.
3 Click Restore Configuration Now.
The SpeedTouch™ loads your configuration and restarts.
At the end of the procedure, the SpeedTouch™ returns to the Home page.