THOMSON SpeedTouch 585(v6) - New Content Level

68
E-DOC-CTC-20051017-0147 v1.0
Chapter 4
SpeedTouch™ Web Interface
4.5.9 New Content Level
Accessing the New
Content Level page
On this page you to create a new content level. Proceed as follows to access this
page:
1 In the Toolbox menu, click Parental Control.
2 In the upper right corner, click Configure.
3 In the Pick a task list, click Create a new content level.
Procedure To apply a new content level, you must perform the following actions:
1 Content level creation
2 Content level configuration
3 Content level definition
4 Content level activation
Content level creation Proceed as follows:
1 In the Name box, type a name for the new content level.
2 In the Description box, type a short text to describe what this security level will
do.
3 Click Next.
The Configuration section appears.
Content level
configuration
Proceed as follows:
1 Click:
 Clone Existing Level to start from a previously created content level.
 Black List to allow all Web sites by default.
 White List to block all Web sites by default.
2 Click Next.
The Content level definition section appears.
!
You can create up to 16 content levels.
If no levels have been defined before, this option will not be
shown.