49
E-DOC-CTC-20051017-0147 v1.0
Chapter 4
SpeedTouch™ Web Interface
4.3.6 Reset to Factory Defaults
Introduction The Reset to Factory Defaults page allows you to reset the SpeedTouch™ to return
to the initial configuration of your SpeedTouch™. All your changes will be
deleted.The following message appears:
Resetting the
SpeedTouch™ factory
defaults
Proceed as follows:
1 In the left menu, click SpeedTouch.
2 In the Pick a task list, click Return to Factory Default Settings.
3 Click Yes, reset my SpeedTouch.
!
If you reset your SpeedTouch™ to factory default settings, all active
connections will be disconnected.
To Next Page