THOMSON SpeedTouch 585(v6) - Page 77

69
E-DOC-CTC-20051017-0147 v1.0
Chapter 4
SpeedTouch™ Web Interface
Content level definition Only Web sites that match the selected content level will be allowed. Proceed as
follows:
1 If you want to:
 Allow a category:
Select the check box next to the category name.
 Allow an entire group:
Select the check box next to the group name.
 Block a category:
Clear the check box next to the category name.
 Block an entire group:
Clear the check box next to the group name.
2 Click Apply.
Content level activation To activate your new content level:
1 In the Toolbox menu, click Parental Control.
2 In the upper right corner, click Configure.
3 In the Content Level list, select your new content level.
4 Click Apply.
The new content level is now active.