90
E-DOC-CTC-20051017-0147 v1.0
Chapter 4
SpeedTouch™ Web Interface
Allowing new wireless If you selected New stations are allowed (via registration) or in the New stations
are not allowed list, wireless clients have to be added manually.
Proceed as follows:
1 In the Home Network menu, click Devices.
2 In the Pick a task list, click Search for wireless devices.
The SpeedTouch™ searches for new wireless stations that use the encryption
key of the SpeedTouch™ Access Point.
The SpeedTouch™ takes you to the Home Network. The new station will be
shown next to the name of the SpeedTouch™ WLAN.
To view the device settings, click the name of the new station. For more
Information, see “4.6.4 Wireless Device Settings” on page 86.
To Next Page