EN 10
English
Press the blue button to display the
programmes’ type and subtype lists.
Navigate through the different types and
subtypes using the navigation buttons on the
remote control.
highlight from the
list, press
OK
to select (or
the type when selected. When you select a type,
all its subtypes will be selected accordingly.
subtype list.
programmes will be highlighted.
- Add schedule Option on the
remote control to bring up the Schedule list
menu. For details on scheduled recording, refer
to the Schedule list section.
Press Guide/Exit to exit the EPG and switch to
the selected channel.
Allows you to record your favourite TV programme.
Before you use the function, connect a USB memory
function is not available for Finland.
Press Option on the remote control and select
.
Press OK/
Press:
-
is put into a PVR folder in
and named after the channel number;
- the green button to stop recording manually; if
stop automatically.
- to adjust the recording duration.
In recording, PVR mini pane will also show on the
screen to indicate the recording progress.
To watch the recorded programme, exit PVR mode
. Select the
Press OK to play. (It is the same if you record a
Notes:
- When CI+ card is used, PVR function will be
disabled.
- Only available for digital channels.
-
format.
- Before you connect the USB device to the set,
make sure you have backed up the data in the
device to avoid the loss of your important data
due to unforeseen malfunction.
- The bigger the USB device memory size for the
PVR function, the longer the recording time.
- If you want to change channel or signal source
during recording, store the recording data before
changing the channel or source.
-
- Do not disconnect the USB memory device when
otherwise the system or the device may be
damaged.
Schedule list
This function is used to perform scheduled recording.
Press Option on the remote control and select
Quick access > Schedule list.
Press to display the schedule list.
To add a schedule into your schedule list, press
Schedule list. Then,
- Channel number: use to select the
channel number.
- Start date: use the digit buttons to set the
recording date.
- Start time: set the starting time of the recording.
- Stop time: set the stopping time of the recording.
- Schedule type:
et Reminder to be reminded that you can
switch to the scheduled programme when the
time you have set comes. When time is out and
you do not execute any operation, the dialog box
will disappear and no further operation will be
executed.
et Record to check if you really want to start
your scheduled recording when the time you
have set comes. When time is out and you do
not execute any operation, scheduled recording
will start automatically.
- Repeat type: set different repeat modes for the
recording.
Press to select Add, then press OK to
add the schedule you set into your schedule list.
Press the red button to repeat above procedures
to add another schedule.
If you wish to edit or delete a schedule, select it
and press OK to enter.
Press Exit to close the menu.
Notes for password in Parental Control Lock function:
- The default password is 1234. You can change it to a
new one.
- The super password is 0423. If you forget your code,
enter the super password to override any existing codes.
Use more of your TV
To Next Page
Loading...
