EN 6
Use more of your TV
- Demo partition: Select the mode in which you
want to demo the effect of motion enhancement.
- Demo: Start the demo by pressing OK.
Press Exit to close the menu.
PAP function
To display the pictures from different source inputs
side by side. Note that one window is for both
analogue and digital TV inputs, the other is for VGA,
HDMI and CMP inputs. (
Scart on both windows.
Press Menu to display the main menu.
Select PAP and press OK to enter.
Select the PAP
off PAP function.
Select
TV window.
When the focus is on the TV window, the digit
buttons and P+/- work in TV. When the focus is on
the other window, P+/- switches available external
sources.
Use subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via Teletext or DVB-T/DVB-C
digital broadcasts. With digital broadcasts, you have
the additional option of selecting a preferred subtitle
language.
Press Menu on the remote control and select
Press
Select the Subtitle option, and press to select
On/Off to turn on/off subtitles.
Press Menu on the remote control and select
Press to select a subtitle language as your
preferred language.
Press to select Digital subtitle language
Press to select a secondary subtitle language.
Press Exit to close the menu.
Shortcut operation
: Press
on the remote
control to directly select a subtitle language available
for the selected digital TV programme.
Press
Menu
on the remote control and select
Press to select a subtitle type. You can select
Hearing impaired to display the hearing impaired
subtitles with your selected language.
Press Menu on the remote control and select
Options
> Decoding page language. Select a proper type of
language in which Teletext will display.
For digital TV channels, your TV could zap to a
service with multiple initial Teletext pages in different
languages. This function allows you to select an
available language as primary language, which
relates to different initial Teletext pages.
Press Menu on the remote control and select
Options
> Digital teletext language. Press to select.
SPDIF type
Connect to an audio device through the
SPDIF
output. Press
Menu
on the remote control and select
Options > SPDIF type
. Select a proper sound type
from the list for digital programmes.
- If the current programme outputs sound in Dolby D
format, then either PCM or Dolby D can be selected.
- If the current programme does not output sound
in Dolby D format, only PCM can be selected.
Otherwise no sound will be output.
- Select Off to turn off the audio output from the audio
device connected to the SPDIF output.
Note: The options you may choose depend on the
programme you are watching. If you select
PCM and the sound is ahead of the picture,
you can select SPDIF delay from the Options
menu and press to adjust the delay time
to synchronize the sound with the picture.
To search for CEC devices connected to the HDMI
sockets in your TV and enable one-touch play and
one-touch standby between CEC devices.
Press
Menu
on the remote control, then select
.
Press to select
On
or
Off
.
Use one-touch play
One-touch play enables you to press the play button
on, for example, your DVD remote control. This starts
playback on your DVD device and automatically
switches your TV to the correct source, displaying DVD
content.
English
To Next Page
Loading...
